Farmers who rely on GPS for yield monitors or easy-steer on tractors should be aware of some changes that may affect them this fall.
â€śThe Federal Aviation Administration, which manages the Wide Area Augmentation Service (WAAS) for GPS differential correction, replaced two older satellites with new ones in July,â€ť says Pat Reeg, field operations manager with the Iowa Soybean Association.
While the new satellites will give GPS users increased signal strength and more accuracy, itâ€™s possible that users may have to update the firmware in their receivers in order to receive signal correction from them.
â€śThe change in satellites affects only WAAS GPS,â€ť Reeg says. â€śNot all WAAS receiver systems will be affected. It does not impact OmniSTAR, John Deere SF2 or SF2, or the Nationwide Differential GPS, which is the old Coast Guard Beacon System.â€ť
Reeg says if youâ€™re not certain whether the change will affect your GPS receiver, all you need to do is turn it on and check to make sure youâ€™re receiving a differential correction signal. If you are, youâ€™re set to go. If not, youâ€™ll need to replace the firmware in your receiver with an updated version. Here are some links to common GPS units used today:
â€śMost of the precision ag equipment manufacturers have updated firmware that can be downloaded from their product support site, or you can ask your dealer about it,â€ť Reeg says. â€śGenerally, the firmware updates are provided at no cost, but dealers may charge for their time in updating systems for growers.â€ť
Reeg says that without the updated firmware, results from uncorrected GPS will be less reliable because of the uncorrected signal. â€śField passes on your yield maps may look more like spaghetti than straight lines,â€ť he says.
â€śItâ€™s especially important for growers participating in ISA On-Farm Network replicated strip trial studies, since weâ€™re looking for accurate information on which to base future crop production decisions,â€ť Reeg says.
For more information, contact your precision ag dealer or call Pat Reeg at 800-303-1423 or 515-669-9184.